2W200-20H DN20 Brass Normally Open Solenoid Valve
||●Coil Type: IP65 DIN Connector
|●Mode of Operation:Normally Open
|●Pipe Size: 3/4" G or NPT
||●Response Time: Less than 1 second
||●Duty Cycle: 100% but not indefinitely
||●Suitable Media: Water, Air, Oil, Gas
|●Seal Material: NBR or VITON
|●Pressure Range: 0-6Bar
2W200-20H 3/4" Brass Normally Open Solenoid Valve works great with water, air, gas, fluid and vacuum. Operates normally open and has a solid brass body. This valve is compact in size and works very well with a variety of applications. Irrigation, Fountains, Water Filtration, Solar Heating, Aquariums, Automotive, Beer Brewing, Hydroponics, HVAC, and Plumbing and everywhere else one of our valves can be applied
It's two way two position semi direct acting diaphragm electric solenoid valve uses NBR or VITON diaphragm material that is compatible with many liquid such as water up to 150°C. The valve is normally open, open when de-energized and closed when energized. It is capable of operating at zero differential pressure. This compact solenoid features with female BSP 3/4" thread or NPT 3/4" thread.
2W200-20H 3/4" Brass Solenoid Valve has four coil with voltage AC220V, AV110V, DC24V and DC12V. The coil head is fitted with a DIN connection that can easily be connected with your own choice of terminals. This model is mountable in any position and features a conveniently positioned arrow on the body to indicate the direction of flow. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.
When the temperature is high, it is liquid, and solid when cooled; Corrsive Fluid; Fluid above 20 cst concentration.
The impurities in the line must be cleaned first before installation. In order to prolong service life, Y filter should be installed on the front end of solenoid valve.
|Solenoid Valve Size Chart(mm)